Re: Поругайте резюме, pls
Очередная версия, содержащая советы, любезно предоставленные Lucy и Veey
Contact Information
Name: Name
Address: Address
Phone: Phone
E-mail: mail@yahoo.com
Objective
Challenging position in Network Engineering where six years of extensive
networking experience would be needed.
Summary
Network Engineer is seeking challenging position in consulting. Strengths
include: strong Cisco experience (Cisco Certified CCNP CCDP), more than
6 years of overall experience in IT, 4 years of experience in systems and
network engineering, Master degree in computer science, multiple vendor
certifications in a variety of IT disciplines, strong analytical and
multitasking skills.
Skills
• Operating Systems: Familiar with UNIX (Solaris, FreeBSD), extensive
experience in Windows (98/NT/2000/XP), extensive experience in Cisco IOS.
• Software and tools: Cisco Works 2000 (LMS, RWAN, QPM, CVM, VMS), IRIS
packet analyzer, Microsoft Office 97/2000/XP, Familiar with
Lotus Domino (Notes).
• Hardware: Cisco routers (800/1700/2600/3600/3700/7200 series), Cisco switches
(2900/3500/6500 series), Cisco AS5350 Universal Gateways, Cisco PIX Firewall
500 Series, Cisco IGX 8400 series WAN Switches, Cisco Aironet Wireless
equipment (wireless bridges, access points, PC cards), RAD Network equipment
(2100/2104 Megaplex series, RAD ASMi xDSL modems), Patton DSL modems,
CSU/DSU’s, Excellent knowledge of all current PC Hardware components
(IBM PC Authorized Servicer), Familiar with SUN SPARC platforms (SUN Netra
servers), NSG 300, 500, 800 series.
• Scripting Languages: Perl.
• Network Protocols and Technologies: Ethernet (Fast and Gigabit Ethernet),
Frame Relay, X25, ISDN, TCP/IP, IPX/SPX, Routing protocols (IGRP, RIP, EIGRP,
OSPF, BGP), VoIP, VPN, NAT, VLAN’s (802.1q, ISL), QoS, IPSec, SNMP.
• Other Skills: LAN and WAN design and implementation (4+ years), Strong
technical support background includes LAN and WAN troubleshooting,
administration and support (4+ years), Expert Knowledge of Network Cabling
Solutions (Certified Molex Premise Networks Professional), Extensive
hardware and software repair experience.
Professional Experience
July 2002 – Present - Systems Integrator
Position: Network Engineer (part-time PSG Consultant)
Duties:
• Network equipment configuration
• Client support and consulting
• LAN and WAN projects development and implementation
Recent projects:
- Public VoIP Telephony Solution, based on debit cards
Customer: Some Company.
- Configured all Cisco Systems equipment involved in project (AS5350
universal gateways, H323 gatekeeper (based on Cisco 2651 router), two
2950 Ethernet Switches, cisco ATA 186 voice gateways)
- Provided technical support to customer’s engineering team, including
trainings, targeting basic operations with Cisco equipment – dial-peers
editing, H232 endpoints adding, TCL scripts editing.
Environment & Tools used: Windows 2000/XP, IPSoft billing solution,
Cisco AS5350, Cisco 2651 router, Cisco 2950
switches, Cisco ATA 186, HP Netserver lp1000r,
Zyxel Prestige 791 bridges, TCP/IP, H323, NTP.
- Implementation of Cisco security solution
Customer: Local branch of a well-known International law enforcement
organization.
- Configured two Cisco PIX 515E Firewalls, working in failover mode with
DMZ, to ensure safe transaction of confidential information to remote
site, using VPN links.
Network topology included:
1. Mail server, placed in DMZ zone
2. Internal users workstations, placed behind Inside firewall interface
3. Two Ethernet layer 2 switches for outside and inside networks
Environment & Tools used: Windows 2000/XP, Microsoft Exchange Mail server,
Cisco PIX 515E (FO option), D-Link Ethernet
switches, TCP/IP, VPN (IPSec, 3DES).
- WAN solution for local commercial bank
Customer: Some Commercial bank
- Developed network design solution, including network architecture and
equipment configurations
- Conducted regular meetings with client
- Contributed to final design documentation
- Worked on the last stage of project implementation, providing assistance
to team of network engineers (installation and configuration of Cisco
routers)
Environment & Tools used: Windows 2000/XP, Cisco Works 2000 (RWAN, VMS), Cisco
routers (1760V, 3660, 1721 series), EIGRP, TCP/IP,
VPN.
January 2002 – Present – Some Frame-relay Provider
Position: Network Engineer
Duties:
• Office LAN administration (about 70 Ethernet ports)
• Development plans preparation for Frame-Relay Provider's WAN
• Frame Relay network administration and 7x24 support (about 200 WAN ports)
• Management of all aspects of hardware implementation including acquisition,
site preparation and installation
• Work with clients to create business models for present and future projects
• Responsible for configuration of Frame Relay provider's telecommunication equipment
including IGX WAN switches, Cisco 17xx, 26xx, 36xx, 37xx routers,
Cisco 2950, 3550 switches, NSG 300, 500, 800 series routers, RAD Megaplex
multiplexers.
• Responsible for administration of Cisco Works 2000 Server (RWAN, LMS, DFM,
Solaris version)
July 1999 – December 2001 - Some company
Position: Service Engineer
Duties:
• Carried out pre – sale preparation of brand new computers (software
installation - operational systems, anti-virus software,
office applications)
• Managed post - sale service and support (computer software and
hardware repair)
• Assisted in deploying small to medium TCP/IP LANs (10 – 200 hosts) for
clients of Some company, including cabling (Coax, TP, FO),
network properties configuration on host computers, server racks design
and installation, users PC and network trainings
Education and certifications:
• CCDP – Cisco Certified Design Professional (since Nov.2003)
• CCDA – Cisco Certified Design Associate (since Sep.2003)
• CCNP – Cisco Certified Network Professional (since Jul.2003)
• CCNA – Cisco Certified Network Associate (since May.2002)
• IBM PC Authorized Servicer (since Dec.2000)
• MS in Computer Science, Technical University of Moldova (Jun.1999)
Trainings:
• Structured Cabling Systems, Molex Premise Networks (Kiev, UA) (May.2003)
• ICND – Interconnecting Cisco Network Devices (Moscow, RU) (Dec.2002)
• IBM ThinkPad problem determination, IBM Netfinity servers hardware
repair and problem determination, IBM Client Systems Service Training
(IBM Training Center, Moscow, RU) (Dec.2000)
References available upon request
Очередная версия, содержащая советы, любезно предоставленные Lucy и Veey
Contact Information
Name: Name
Address: Address
Phone: Phone
E-mail: mail@yahoo.com
Objective
Challenging position in Network Engineering where six years of extensive
networking experience would be needed.
Summary
Network Engineer is seeking challenging position in consulting. Strengths
include: strong Cisco experience (Cisco Certified CCNP CCDP), more than
6 years of overall experience in IT, 4 years of experience in systems and
network engineering, Master degree in computer science, multiple vendor
certifications in a variety of IT disciplines, strong analytical and
multitasking skills.
Skills
• Operating Systems: Familiar with UNIX (Solaris, FreeBSD), extensive
experience in Windows (98/NT/2000/XP), extensive experience in Cisco IOS.
• Software and tools: Cisco Works 2000 (LMS, RWAN, QPM, CVM, VMS), IRIS
packet analyzer, Microsoft Office 97/2000/XP, Familiar with
Lotus Domino (Notes).
• Hardware: Cisco routers (800/1700/2600/3600/3700/7200 series), Cisco switches
(2900/3500/6500 series), Cisco AS5350 Universal Gateways, Cisco PIX Firewall
500 Series, Cisco IGX 8400 series WAN Switches, Cisco Aironet Wireless
equipment (wireless bridges, access points, PC cards), RAD Network equipment
(2100/2104 Megaplex series, RAD ASMi xDSL modems), Patton DSL modems,
CSU/DSU’s, Excellent knowledge of all current PC Hardware components
(IBM PC Authorized Servicer), Familiar with SUN SPARC platforms (SUN Netra
servers), NSG 300, 500, 800 series.
• Scripting Languages: Perl.
• Network Protocols and Technologies: Ethernet (Fast and Gigabit Ethernet),
Frame Relay, X25, ISDN, TCP/IP, IPX/SPX, Routing protocols (IGRP, RIP, EIGRP,
OSPF, BGP), VoIP, VPN, NAT, VLAN’s (802.1q, ISL), QoS, IPSec, SNMP.
• Other Skills: LAN and WAN design and implementation (4+ years), Strong
technical support background includes LAN and WAN troubleshooting,
administration and support (4+ years), Expert Knowledge of Network Cabling
Solutions (Certified Molex Premise Networks Professional), Extensive
hardware and software repair experience.
Professional Experience
July 2002 – Present - Systems Integrator
Position: Network Engineer (part-time PSG Consultant)
Duties:
• Network equipment configuration
• Client support and consulting
• LAN and WAN projects development and implementation
Recent projects:
- Public VoIP Telephony Solution, based on debit cards
Customer: Some Company.
- Configured all Cisco Systems equipment involved in project (AS5350
universal gateways, H323 gatekeeper (based on Cisco 2651 router), two
2950 Ethernet Switches, cisco ATA 186 voice gateways)
- Provided technical support to customer’s engineering team, including
trainings, targeting basic operations with Cisco equipment – dial-peers
editing, H232 endpoints adding, TCL scripts editing.
Environment & Tools used: Windows 2000/XP, IPSoft billing solution,
Cisco AS5350, Cisco 2651 router, Cisco 2950
switches, Cisco ATA 186, HP Netserver lp1000r,
Zyxel Prestige 791 bridges, TCP/IP, H323, NTP.
- Implementation of Cisco security solution
Customer: Local branch of a well-known International law enforcement
organization.
- Configured two Cisco PIX 515E Firewalls, working in failover mode with
DMZ, to ensure safe transaction of confidential information to remote
site, using VPN links.
Network topology included:
1. Mail server, placed in DMZ zone
2. Internal users workstations, placed behind Inside firewall interface
3. Two Ethernet layer 2 switches for outside and inside networks
Environment & Tools used: Windows 2000/XP, Microsoft Exchange Mail server,
Cisco PIX 515E (FO option), D-Link Ethernet
switches, TCP/IP, VPN (IPSec, 3DES).
- WAN solution for local commercial bank
Customer: Some Commercial bank
- Developed network design solution, including network architecture and
equipment configurations
- Conducted regular meetings with client
- Contributed to final design documentation
- Worked on the last stage of project implementation, providing assistance
to team of network engineers (installation and configuration of Cisco
routers)
Environment & Tools used: Windows 2000/XP, Cisco Works 2000 (RWAN, VMS), Cisco
routers (1760V, 3660, 1721 series), EIGRP, TCP/IP,
VPN.
January 2002 – Present – Some Frame-relay Provider
Position: Network Engineer
Duties:
• Office LAN administration (about 70 Ethernet ports)
• Development plans preparation for Frame-Relay Provider's WAN
• Frame Relay network administration and 7x24 support (about 200 WAN ports)
• Management of all aspects of hardware implementation including acquisition,
site preparation and installation
• Work with clients to create business models for present and future projects
• Responsible for configuration of Frame Relay provider's telecommunication equipment
including IGX WAN switches, Cisco 17xx, 26xx, 36xx, 37xx routers,
Cisco 2950, 3550 switches, NSG 300, 500, 800 series routers, RAD Megaplex
multiplexers.
• Responsible for administration of Cisco Works 2000 Server (RWAN, LMS, DFM,
Solaris version)
July 1999 – December 2001 - Some company
Position: Service Engineer
Duties:
• Carried out pre – sale preparation of brand new computers (software
installation - operational systems, anti-virus software,
office applications)
• Managed post - sale service and support (computer software and
hardware repair)
• Assisted in deploying small to medium TCP/IP LANs (10 – 200 hosts) for
clients of Some company, including cabling (Coax, TP, FO),
network properties configuration on host computers, server racks design
and installation, users PC and network trainings
Education and certifications:
• CCDP – Cisco Certified Design Professional (since Nov.2003)
• CCDA – Cisco Certified Design Associate (since Sep.2003)
• CCNP – Cisco Certified Network Professional (since Jul.2003)
• CCNA – Cisco Certified Network Associate (since May.2002)
• IBM PC Authorized Servicer (since Dec.2000)
• MS in Computer Science, Technical University of Moldova (Jun.1999)
Trainings:
• Structured Cabling Systems, Molex Premise Networks (Kiev, UA) (May.2003)
• ICND – Interconnecting Cisco Network Devices (Moscow, RU) (Dec.2002)
• IBM ThinkPad problem determination, IBM Netfinity servers hardware
repair and problem determination, IBM Client Systems Service Training
(IBM Training Center, Moscow, RU) (Dec.2000)
References available upon request
Comment